TunSafe Forum

Welcome to the TunSafe Community Forum. This is open for discussions related to TunSafe and the WireGuard protocol.

You are not logged in.

#1 2018-08-13 02:18:32

wiggo
Administrator
Registered: 2018-03-09
Posts: 47

Need a static IP tunneled to your TunSafe / WireGuard endpoint?

If you would like to receive your own static IP tunneled to your endpoint, make a donation and shoot us an e-mail with a public key (keep the private key and insert this in the .conf we'll send you). Great if you are behind a public IP and want to host a service, or just need a static IP for an IoT project.

You can connect to our nl-ams1-v2 server which is on the same network to evaluate speed/latency.

All ports are open, both inbound and outbound. The static IP can not be changed during the period.

€10 = 6 months
€25 = 12 months

I hope the above amounts are high enough to scare away spammers, yet reasonable for those who are genuinely interested.

Offline

#2 2018-10-08 05:32:17

PacoBell
Member
Registered: 2018-10-08
Posts: 3

Re: Need a static IP tunneled to your TunSafe / WireGuard endpoint?

I'm assuming this is a static public IP address? Also IPv6?

Offline

#3 2018-10-09 19:47:42

wiggo
Administrator
Registered: 2018-03-09
Posts: 47

Re: Need a static IP tunneled to your TunSafe / WireGuard endpoint?

Yep, these are static public IP addresses. Unfortunately only IPv4 at the moment.

Offline

#4 2018-10-28 00:21:06

Rainmaker
Member
Registered: 2018-08-05
Posts: 22

Re: Need a static IP tunneled to your TunSafe / WireGuard endpoint?

Out of interest, why does it cost more for 12 months, than it does for 2x 6 months?

Offline

Board footer

Powered by FluxBB