TunSafe Forum

Welcome to the TunSafe Community Forum. This is open for discussions related to TunSafe and the WireGuard protocol.

You are not logged in.

#1 2019-06-03 15:10:24

TimM
Member
Registered: 2019-06-03
Posts: 2

'Invalid Ports' Config error on VPN router

Hi,

I'm trying to load TunSafe on a wireguard supported router (GL-MT300N-V2)

I've loaded the config file, but get 'Invalid Ports' error.

Here's the config:

[Interface]
PrivateKey = 8mdeD(.....)
Address = 10.17.57.117/8
DNS = 8.8.8.8

[Peer]
PublicKey = FO1Hc6Ue(.....)
Endpoint = 190.2.141.162:51840
AllowedIPs = 0.0.0.0/0

I tried adding it manually, but it wouldn't accept it, but didn't give any specific error either

Offline

#2 2019-06-04 09:51:07

TimM
Member
Registered: 2019-06-03
Posts: 2

Re: 'Invalid Ports' Config error on VPN router

I may have found the problem - a firmware bug in the router.

https://forum.gl-inet.com/t/wireguard-c … rking/7043

Offline

Board footer

Powered by FluxBB