TunSafe Forum

Welcome to the TunSafe Community Forum. This is open for discussions related to TunSafe and the WireGuard protocol.

You are not logged in.

#1 2019-01-04 16:51:00

IKTao
Member
Registered: 2019-01-04
Posts: 1

Connected but No Data received

Hi, I have installed Tunsafe 1.4( install tunsafe crient and tunsafe TAP driver seperately because the installer can not access to the tunsafe web to download the driver), and start up that normally, and switched it on.It shows me connected to the serve, but I can not access to the webs through neither Chrome nor Edge. The App shows me the up and down speed is 0. I have installed tunsafe to another 3 computers in same local network, and all of those is running quite well.I wandered why this one can not receive any data, where should me to check or to find the problem.Please help me!

Offline

#2 2019-01-07 13:09:04

Hitchhiker
Member
From: The Netherlands
Registered: 2018-12-11
Posts: 43

Re: Connected but No Data received

See my post on the same subject here please: https://forum.tunsafe.com/viewtopic.php?pid=5039#p5039

Offline

#3 2019-01-07 20:12:04

Hitchhiker
Member
From: The Netherlands
Registered: 2018-12-11
Posts: 43

Re: Connected but No Data received

The Dutch server using Tunsafe-nl-dc1 is back up and running again now so I assume the others are too.

If you're still having problems please post again.

Offline

Board footer

Powered by FluxBB