TunSafe Forum

Welcome to the TunSafe Community Forum. This is open for discussions related to TunSafe and the WireGuard protocol.

You are not logged in.

#1 2019-08-23 11:35:31

inactive
Member
Registered: 2019-08-23
Posts: 1

allow 0.0.0.0/0 - automatic add wrong route

hi

[13:26:48] Added Route SERVER_IP/32  =>  192.168.8.1 -------------> ?!?!? my home router ip 10.0.1.1
[13:26:48] Added Route 0.0.0.0/1  =>  10.123.0.2
[13:26:48] Added Route 128.0.0.0/1  =>  10.123.0.2


where does this route come from and how to fix it?

CLIENT CONF
[Interface]
Address = 10.123.0.1/32
PrivateKey = key
ListenPort = 18400
DNS = 1.1.1.1

[Peer]
PublicKey = key
Endpoint = XXX:18400
#AllowedIPs = 10.123.0.1/32
AllowedIPs = 0.0.0.0/0, ::/0

# This is for if you're behind a NAT and
# want the connection to be kept alive.
PersistentKeepalive = 25

SERVER CONF
[Interface]
Address = 10.123.0.2
ListenPort = 18400
PrivateKey = key

[Peer]
PublicKey = key
AllowedIPs = 10.123.0.1/32


Thanks!

Offline

Board footer

Powered by FluxBB