TunSafe Forum

Welcome to the TunSafe Community Forum. This is open for discussions related to TunSafe and the WireGuard protocol.

You are not logged in.

#1 2019-05-07 17:47:53

JL
Member
Registered: 2019-05-07
Posts: 1

TunSafe on Ubuntu 18.04 KVM guest behind pfSense firewall

Dears,

Does TunSafe work on an Ubuntu KVM guest on a CentOS host and this all behind a pfSense firewall? NAT and ports are opened/in place. So far I have not been able to connect with my own server using the iOS app. I can see the UDP packets coming in on the server using iptraf-ng. Below the configs, keys are removed. Does TunSafe have a logfile option for debugging? Any suggestions? Cheers.

** Server side:

[Interface]
PrivateKey = xxxxx
ListenPort = 51820
DNS = 192.168.10.3
BlockDNS = true
Address = 172.16.255.1/24
MTU = 1420

[Peer]
PublicKey = yyyyy
AllowedIPs = 0.0.0.0/0


** Peer side tunsafe's iPhone app, scanned QRcode:

[Interface]
PrivateKey = zzzzz
Address = 172.16.255.100/24

[Peer]
PublicKey = aaaaa
AllowedIPs = 0.0.0.0/0
Endpoint = x.y.z.t:51820
PersistentKeepalive = 25

Offline

#2 2019-05-09 11:11:35

wiggo
Administrator
Registered: 2018-03-09
Posts: 75

Re: TunSafe on Ubuntu 18.04 KVM guest behind pfSense firewall

Hi JL,

Currently there is not possible to see the debug log in the iOS and Android apps. We'll fix that in the upcoming released.

Have you tested the same config file in any other client, macOS, Windows, etc?

Offline

Board footer

Powered by FluxBB